INJ-POE-SPLIT - Passive PoE Injector and Splitter, Requires the use of…

Passive PoE Injector and Splitter - Requires the use of the included pair - Input and output up to 48 V - Connectors RJ45 and power supply jack - Up

1 Pair Power Over Ethernet Passive PoE Adapter Injector + Splitter Kit PoE Cable

New Gigabit Power over Ethernet 12V Splitter - ITM Components

> Use in pairs for NON-POE switch and NON-POE device. Transmits power and 10/100Mbps ethernet data sources. > Injector input voltage: 12V. > Splitter

23-8336 Passive 12V PoE Injector & Splitter Kit

Passive PoE to USB Type C Power Delivery with Max Output of 41 Watts - Separate 10/100/1000 Ethernet Data and USB-C Power

Passive POE Extender with two POE outputs 300ft POE extension max 900f

GPOE-1AB-REV2-Y [1 Amp/mode; Includes 21-21-Y]

24V 1amp 10/100M PoE Splitter 802.3af/at - Coolgear

Support DC voltage up to 48V Transforms Non PoE devices to PoE enabled Data Rate: 100/100Mbps; DC Jack: 5.5*2.1mm Use with IP security camera,

4-Pair Passive PoE Injector and PoE Splitter Kit with 10/100Mbps Network for IP Security Camera - Full IEEE 802.3af Compliant

GigE PoE Splitter/Voltage Converter

The TP-POE-48 Power over Ethernet Power Source offered by Tycon Power is a quality midspan power source for years of reliable operation even in the toughest conditions. They accept data-in to a shielded RJ45 Jack and provide surge protected data-out and power on the shielded RJ45 output jack. They work by supplying power to the remote device on the unused Ethernet pins 4,5(V+) and 7,8(V-). For the R model the voltage is reversed. 4,5(V-) and 7,8(V+).

Tycon Systems TP-POE-48 120/240VAC, 48V 24W Pasv PoE Inserter

WT-GPOE-4-48v48w Gigabit Passive PoE 4 Port Power Over Ethernet Injector with 48

Problem Solved: Mixing PoE and Non-PoE on the Same Network Switch - FASTCABLING

The PoE injector is an economical, single port, high-power 10/100Mbps PoE Injector. It supplies up to 30-Watt of remote power for IP cameras, wireless access points, VoIP phones, and other devices. It allows you to add additional ports to your PoE switch using a Cat-5 cable (sold separately). It complies with IEEE 802.3af PoE standards and can work with 10/100Mbps Base-T networking devices.

SPT 30-Watt Single Port PoE Injector

PoE To DC Power

What is Power over Ethernet (PoE) Splitter and How Does It Work?